Theses/Dissertations from 2021
Circulation and Transport Timescales in Tidally Dominated Estuaries, Sohaib Alahmed
Understanding Hydrologic Risk Within the Context of Climate Variability and Atmospheric Moisture Pathways, Ali Aljoda
Thermal and Mechanical Numerical Modeling of Extrusion-based 3d Printed Reinforced Polymers for Selecting Manufacturing Process Parameters, Sunil Bhandari
Comparison of Land Use and Flowslide Incidence in Palu Valley Following the 2018 Mw 7.5 Palu-Donggala Earthquake, Peta C. Fifield
Development of Hybrid Ultra-High Performance Concrete Thermoplastic Composite Panels for Blast and Ballistic Protection, Alyssa M. Libby
Hydrodynamic Impacts of Expanding Aquaculture, Zhilong Liu
Determination of Bridge Behavior Through Live-load Testing and Advanced Numerical Analysis, Andrew Schnack
Theses/Dissertations from 2020
Understanding the Influence of Nonlinear Seas on Wind Generated Waves, Taylor L. Bailey
Use of GIS to Find Optimum Locations for Anaerobic Digestion or Composting Facilities in Maine, Usha Humagain
Durability of Entrapped Gas in Quasi-saturated Porous Media: Two Geotechnical Perspectives, Babak Mahmoodichanzab
An Experimental Investigation of Alternative Wave Attenuation Mechanisms for a Modular Breakwater, Richard Perry
Does Circularizing Source-Separated Food Waste Present A Risk To Our Food?, Astha Thakali
Wave Attenuation Capacity of Suspended Aquaculture Structures with Sugar Kelp and Mussels, Longhuan Zhu
Theses/Dissertations from 2019
Investigating the Time-dependent and the Mechanical Behavior of Wood Plastic Composite Lumber Made from Thermally Modified Wood in the Use of Marine Aquacultural Structures, Murtada A. Alrubaie
Hydro-Climatic Dynamics of Lake Watershed Systems in a Changing Climate, Mussie Tekie Beyene
Tidal and Subtidal Processes at the Mouth of a Macrotidal Estuary, Rachel Chambers
Assessment of Helical Anchors Bearing Capacity for Offshore Aquaculture Applications, Leon D. Cortes Garcia
Shear Connectors For Hybrid Composite FRP-Concrete Bridge Girders, Dante Guzzi
An Investigation on the Effects of Cellulose Nanofibrils on the Performance of Cement Based Composites, Hosain Haddad Kolour
Cellulose Nano-composites for Performance Enhancement of Portland Cement-based Materials, Kavya Shirisha Kamasamudram
Utilization of Low-lime Calcium Silicate in Hydrated and Carbonated Cementitious Materials, Mohammad Rakibul Islam Khan
Perspectives on Water Resources Risk, Policy, and Stewardship, Anne Marie Lausier
Development of Finite Element Techniques to Simulate Concrete-Filled Fiber-Reinforced Polymer Tube Structures, Hakeem S. Majeed
Modeling Response of Water Quality to Land-use and Climate Change in Lake Auburn, Me, Nicholas Messina
Process Optimization of Levulinic Acid Production From Seaweeds and Its Upgrading to TDO Oil, Maurvin Patel
Potential Value-added Utilization of Wood Ash in Construction Materials, Naveen Saladi
Development of a Hybrid Thermoplastic Composite and Concrete Deck System, Benjamin T. Smith
Tide and Storm Surge Dynamics in Estuaries of Variable Morphology, Preston Spicer
A Laboratory Investigation of Cement Based Materials with Cellulose Nanofibers, Parivash Takasi
Feasibility of a Self-Erecting Shelter with an Inflatable-Fabric-Arch-Supported Roof and Rigid Walls, Jay Wegner
Theses/Dissertations from 2018
Evaluation of Non-Composite Steel Girder Bridges Using Field Load Testing and a Calibrated Finite-Element Model, Mahmood J. Albraheemi
The Dynamics of Mixing and Subtidal Flow in a Maine Estuary, Kristopher Bears
Field Implementation of Tire Derived Aggregate as Lightweight Backfill for Retaining Walls, Jeremy Labbe
Controls on Phosphorus Export from an Agricultural Watershed: Amsden Brook, Fort Fairfield, Maine USA., Gregory J. McDonald
Development of Thermoplastic Composite Reinforced Ultra-High Performance Concrete Panels for Impact Resistance, Reagan M. Smith Gillis
Modeling Coastal Flooding and Sand Transport in the Gulf of Maine during Severe Storms in a Changing Climate, Dongmei Xie
Theses/Dissertations from 2017
Effect of CNF On Drying Shrinkage and Autogenous Shrinkage of Cement Paste, Mohammed Akram Ahmed
Flash Flood Modeling on Single and Multiple Structures and Wave Impact Mitigation Using SPH, sohaib rashid sulaiman alahmed
Effects of Cellulose Nanofibrils on the Rheological Properties of Cement Paste, ethar H. alyaseen
Feasibility of using 3D printed molds for thermoforming thermoplastic composites, Sunil Bhandari
Transformation of Nonlinear Waves in the Presence of Wind, Current, and Vegetation, Haifei Chen
Structural Behavior of Inflatable, Reinforced, Braided, Tubular Members, Joshua Clapp
Experimental Verification of American Bureau of Shipping Concrete Design Methodologies Applied to Floating Offshore Wind Turbines, Mark G. Dwyer
Water Chemistry Dynamics in Four Vernal Pools in Maine, USA, Lydia H. Kifner
Acoustic Emission Analysis of energy Dissipation Mechanisms in Ultra High-Performance Fiber Reinforced Concrete, Roman Kravchuk
Large Payload HIAD Systems: Development of Computationally Efficient Modeling Strategies and Structural Investigations, Andrew C. Young
Theses/Dissertations from 2016
Splicing of Concrete-Filled Fiber Reinforced Polymer Tubes for Structural Applications, Jason K. Burns
Analysis of Safety on Bridge Road Segments Compared to Normal Road Segments, Ryan D. Chabot
Improvement of Soil Spring Model for the Analysis of Buried Arch Structures, Leo N. Helderman
Streamflow Allocation Policy in a Changing Climate in New England Region: A Study of Hydrologic, Ecological, and Chemical Variability and Change, Md. Rakibul Hassan Khan
Development of a High-strength, Durable, Lightweight Concrete for Marine Applications, Danielle L. MacDonald
Analysis and Recommendations to Improve Traffic Safety & Flow for Pedestrians Bicyclists and Motorists Along Franklin Street, Matthew Pelletier
Integrating Laminated Strand Lumber and Lumber From Northeastern U.S. Forests Into Cross-Laminated Timber, Nicholas Matthew Willey
Theses/Dissertations from 2015
The Role of Al and Fe in Controlling Internal P Loading, Lake Auburn, ME, Heather Doolittle
3D Investigation of Flaws in Cement-Based Materials and Their Effect on Split Cylinder Test, Chula Gangsa
Correlation of Engineering Parameters of the Presumpscot Formation to the Seismic Cone Penetration Test (SCPTU), Mathew Hardison
Experimental Evaluation of Fiber Reinforced Polymer Piles in Load-Bearing Applications, Dale Lawrence
Development of a Floating Lightweight Post-Tensioned Concrete Prototype for Marine Applications, Emily Lynn Walton
Behavior of Buried Composite Arch Bridges, Harold J. Walton
Theses/Dissertations from 2014
3D Image Analysis of Energy Dissipation Mechanisms in Ultra High Performance Fiber Reinforced Concrete Subject to High Loading Rates, Lauren S. Flanders
Photocatalytic Removal of Pharmaceutical Compounds from Water Using TiO₂-Doped Zeolites, Zhong Pan
Model Test of a 1:8 Scale Floating Wind Turbine Offshore in the Gulf of Maine, Anthony Michael Viselli
Theses/Dissertations from 2013
Mechanically Fastened Fiber-Reinforced Ploymer (FRP) Flexural Retrofit Systems for Reinforced Concrete Flat-Slab Bridges, Hannah Breton
3D Finite Element Analysis of Ultimate capacity of Suction Caissons Under Multi-Line Loading, Matthew Burns
Modeling the Efficiency of a Semi-Submerged Ocean Wave Energy Converter, Michael Thomas MacNicoll
Assessment of mercury bioavailability to benthic macroinvertibrates using diffusive gradients in thin films (DGT), Delia Massey
Splicing and Local Reinforcement of Concrete Filled FRP Tubes (CFFTS), Heather Parry
Development and evaluation of pile "high strain dynamic test" database to improve driven pile capacity estimates, Cameron Stuart
Models for Infused and Bonded Fiber Reinforced Polymer Sandwich Composite Marine Joints, Scott Michael Tomlinson
Investigations Into the Use of a Composite Tower on Floating Offshore Wind Turbine Platforms, Andrew Charles Young
Theses/Dissertations from 2012
Characterization and Improvement of Wood-Based Thermoplastic Reinforced Flexible Wall Panels, Garrett Edward Luszczki
A Fracture Mechanics Approach for Predicting the Fatigue Life of Secondarily Bonded FRP Composite T-Joints, Christa Ann Miller-Shelley
Development of Improved Analytical Load Rating Procedures for Flat-Slab Concrete Bridges, Timothy J. Poulin
Strain Rate and Temperature Effects of Polymer Foam Core Material in Marine Composite Sandwich Panels, Deborah Williams
Theses/Dissertations from 2011
Structural Behavior of Externally Reinforced Inflated Fabric Arches and Beams, Kevin E. Brayley
The Millimeter Legal Coordinated Cadastre, Carlton A. Brown
Evaluation and Improvments to the Modular Ballistic Protection System Stand Alone (MBPS SA) Anchoring System, Paul Ervin Curtis
Environmental Durability of Hybrid Braided Polymer Matrix Composites for Infrastructure Applications, Mackenzie Demkowicz
Measurement of Deformation and Damage in Cementitious Split Cylinders by Employing X-Ray Microtomography, Sean Constantine de Wolski
Exfoliated Graphite Nanoplatelet-Filled Impact Modified Polypropylene Nanocomposites, Alex Duguay
Exfoliated Graphite Nanoplatelet-Filled Impact Modified Polypropylene Nanocomposites, Alex Duguay
Exfoliated Graphite Nanoplatelet-Filled Impact Modified Polypropylene Nanocomposites, Alex Duguay
A Microscopic Evaluation of a Low Volume Approach at a Roundabout in Bangor, Maine, Torey Olaf Johnson
Site Characterization Using the Seismic Piezocone in Presumpscot Clay and Development of Piezocone Correlations to Engineering Parameters, Nicholas D. Langlais
Development of a Scale Model Wind Turbine for Testing of Offshore Floating Wind Turbine Systems, Heather Rae Martin
Development of Supplemental Resistance Method for the Design of Drilled Shaft Rock Sockets, James Gregory McCarthy
Characterizing the Behavior and Properties of Nano Cellulose Reinforced Ultra High Performance Concrete, Kimberly Marie Stephenson
Effect of Strain Rate and Hygrothermal Environment in Wood Plastic Composite Sheet Piles, Sandeep Tamrakar
3-D Analysis of Energy Dissipation Mechanisms in Steel Fiber Reinforced Reactive Powder Concrete, Kevin Trainor
Response of FRP Arches to Concrete Filling Loads, Harold J. Walton
Theses/Dissertations from 2010
Crack Propagation in Secondary Bonded FRP Composite Joints, Steven Paul Lewis Blake
Sediment Mercury Dynamics at Two Estuarine Mudflats in Great Bay, New Hampshire, Lauren E. Brown
Quality Assurance and Quality Control Methods for Resin Infusion, Jonathan E. Kenerson
A Lattice Model for the Prediction of the Mechanical Properties of Certain Softwoods, Edwin Nagy
Behavior of FRP-Coated Wood Panels under Dynamic Loading, Nicholas Jon Parlin
Modeling and Characterization of Hollow and Concrete-Filled FRP Piles, Matthew R. Pellerin
Structural Behavior of Wood I-Joist/OSB Roof Panel Assemblies, Derek Gerard Rancourt
Hydrologic Variability and Change in the New England Region, USA, Avirup Sen Gupta