Theses/Dissertations from 2023
The Development of an Advanced Biorefinery to Produce Cellulosic Sugars and Bionanomaterials, Carlaile Fernanda de Oliveira Nogueira
High Shear-High Residence Time Drying of Cellulose Nanofibrils, Charles Eme
Use of Photo Isomers to Enhance the Removal of Lignin From Woody Biomass Hydrolysate, Dipesh J. Karki
Measuring of Thermal Conductivity and Heat Capacity of Different Papers and Heat-sealing Process of Papers With a Polymer Layer, Amenah Khalaf
The Influence of Heat and Mass Transfer on the Setting Rate of Adhesives Between Porous Substrates, Mubarak Mohammed Khlewee
Investigation of Pulsed Electrolysis for Hypochlorous Acid Production, Khoa V. Kieu
Disinfection Applications of On-Site Hypochlorous Acid Production, Deborah Ngabanyi Sebagisha
The Influence of Pre Coating Layers On Barrier Coatings, Kritee Pokharel
Estimation of Wood Pulp Fiber Species Composition From Microscopy Images Using Computer Vision, Tyler Seekins
Solid Acid Catalyzed Dehydration Reactions of Biomass-Derived Alcohols, Mackenzie Todd
Synthesis of a Pharmaceutical Precursor from Bioderived Glucose, Justin O. P. Waters
Theses/Dissertations from 2022
Operation and Preliminary Energy Balance of a Portable Kelp Dryer in Maine, Tuqa Al-Asadi
Catalytic Ring Opening of Mono- and Bicyclic Compounds for the Production of Renewable Diesel and Jet Fuel, Matthew J. Kline
Improving Degree of Delignification and Selectivity of Oxygen Delignification of Southern Pine Kraft Pulp, Azadeh Pahlevanzadeh
Theses/Dissertations from 2021
Growth of Perkinus marinus by Bioreactor Fermentation, Caitlin Murphy
Techno-Economics and Life Cycle Analysis of Upgrading Woody Biomass to Diesel Blendstock, Aysan Najd Mazhar
Theses/Dissertations from 2020
Reaction Kinetics and Mechansim Invistigations of Renewable Chemicals Prodution From Biomass, Hussein Talib Abdulrazzaq
The Effect of Hemicellulose Absorption on Apparent Sheet Density, Christopher M. Albert
Fabrication of Silicon Microneedles for Dermal Interstitial Fluid Extraction in Human Subjects, Caleb A. Berry
Hydrogenation of 2-methylnaphthalene in a Trickle Bed Reactor Over Bifunctional Nickel Catalysts, Matthew J. Kline
Understanding Biomass Upgrading Through Hydrogenolysis Reactions: Kinetics and Mechanism, Jalal Tavana
The Influence of Parameters on the Crack Formation of Pigmented Water Borne Barrier Coatings During Folding, Yaping Zhu
Theses/Dissertations from 2019
Conversion of Pretreated Hardwood to Medium-Chain Fatty Acids for Production of Biolubricants, Koorosh Kashkooli
Parameters that Influence the Performance of Dispersion Barrier Coatings, Randy Raditya
Paper Structure Formation Simulation, Tyler R. Seekins
Reaction Kinetics Analysis of C-O Hydrogenoloysis in Phenol and 5-Hydroxymethylfurfural, Daniela Ignacia Stuck Valenzuela
Prediction of Paper Coating Mechanical Behavior Based on Particle-scale Models, Daniel H. Varney
Theses/Dissertations from 2018
Formate Assisted Pyrolysis of Lignin, Mayank S. Patel
Coating Component Migration In Paper Coatings, Emilia Purington
Theses/Dissertations from 2017
Synthesis and Characterization of Catalysts for the Conversion of Ethanol into Butadiene, Hussein Talib Abdulrazzaq
Creating Renewable Tunable Polymers from Hydroxymethylfurfural, Meredith C. Allen
Characterization of Catalysts for Hydrodeoxygenation of Bio-oils using Phenol as a Model Compound, Abdulazeez Mohammed Khlewee
Production of Bio-oil with Different Oxygen Content and Characterization of Catalytic Upgrading to Transportation Fuel, Mubarak Mohammed Khlewee
Propane Diols: Value Added Coproducts of Biodiesel Production, Karl C. Olson
SO2-Alcohol-Water Fractionation of Sugarcane Straw, Asif Sharazi
Operational Limits of Blade Coating with High Aspect Ratio Pigments, Lisa Weeks
Characterization of Paper Dusting, Gregory K. Yum
Theses/Dissertations from 2016
Production of Acetic Acid in Kraft Pulp Mill Biorefinery Using Bi-Polar Membrane Electrodialysis, Ravikant Amogisidha Patil
Pressurized Fast Pyrolysis of Calcium Formate-Pretreated Biomass, Chi Khanh Hoang Truong
Theses/Dissertations from 2015
Hydrolysis of Cellulose and Glucose Using α-Hydroxysulfonic Acids, William Brett Barclay
Fundamentals of Pyrolysis of Pretreated Biomass, Paige Allison Case
Thermal Deoxygenation of Levulinate and Formate Salts for the Production of Transportation Fuels, Scott J. Eaton
Forces During Forward Roll Coating and Printing of Tensioned Webs, Harrison R. Gates
Tagging of Starch and Latex in Paper Coatings, Emilia Golebiowska
New Applications for Cellulose Nanofibers: Rheological Challenges, Behzad Nazari-Nasrabad
Thermochemical Conversion of Spent Pulping Liquor into Value-Added Products, Jamie L. St. Pierre
Theses/Dissertations from 2014
Removal of Mixed Acids from Aqueous Solution, Aymn Abdulrahman
Techno-Economic Analysis of Formate Assisted Pyrolysis, Hamad AlMohamadi
Techno-Economic Analysis of Pyrolysis of Forest Residues, Jose Luis Carrasco
Method for the Production of Polymer and Carbon Nanofibers from Lignin and Other Water Soluble Polymers, Alexander L. Demers
Modified Prehydrolysis-Kraft Pulping without Formation of "Sticky Lignin" in the Pre-Hydrolysate, Kefyalew Dido
Yield Stress of Pulp Suspensions, Scott R. Grillo
Cellulose Nanofibers Use in Coated Paper, Finley Richmond
Theses/Dissertations from 2013
Synthesis, Characterization and Applications of Photo Active Nanomaterials, Sanjeev Kumar Kandpal
Theses/Dissertations from 2012
Chemically Enhanced Water Removal in Papermaking, James John Beaupré
Synthesis and Characterization of Mesoporous Silica Membranes Modified by Atomic and Molecular Layer Deposition, David Emmett Cassidy
A Study of Thin Fill Behavior Using Nanocalorimetry and Exploration of Potential Application, Rongkai Chen
Fast Pyrolysis of Lignin Biomass in Fluidized Bed Reactor, Saikrishna Mukkamala
Cleavage of Acetyl Groups for Acetic Acid Production in Kraft Pulp Mills, Ravikant Amogisidha Patil
Atomic Force Microscope Techniques to Measure Latex Properties, Pavan Kumar Sindhe
Theses/Dissertations from 2011
The Effect of Different Lignocellulosic Biomass and Different Pretreatment Methods on Cellulase Activity, Mahdieh Aghazadeh
Thermal Conversion of Carboxylate Salts and Catalytic Ketone Hydrogenation, Mohit Bhatia
Synthesis and Characterization of Catalysts for the Selective Transformation of Biomass-Derived Materials, Isaac Tyrone Ghampson
Characterization of Mesoporous Materials Via Fluorescent Spectroscopic Methods, Raymond Russell Kennard
Ink Setting Fundamentals a Focus on Ink Parameters, Jong Suk Sonn
Adsorption and Diffusion of Light Hydrocarbons in DDR Zeolite, Adam Vidoni
Theses/Dissertations from 2010
Acetic Acid Removal from Pre-pulping Wood Extract, Aymn Abdulrahman
The Removal of Wood Components from Hardwood by Hot Water, Rory Jara
Thin Liquid Film Behavior in a Printing Nip, Muddasir Khan
Lignin-Based Carbon Fiber, Jie Luo
The Setting of Water-Based Inks on Uncoated Substrates, Wing T. Luu
Theses/Dissertations from 2009
Hemicellulose Pre-extraction of Hardwood, Xiaowen Chen
Determining Constitutive Relationships in Compressible Fibrous Cakes by Dynamic Methods, Gourish Sirdeshpande
Biological Conversion of Hemicellulose Extract into Value-Added Fuels and Chemicals, Sara Lynn Walton
Theses/Dissertations from 2008
Pre-hydrolysis of the Phenyl Glycosidic Bond in a Model Compound, Sagar Nandkumar Deshpande
Non-Classical Export of Signal Peptide-less Proteins Studied Via Sum Frequency Spectroscopy and Biochemical Techniques, Andrew W. Doyle
The Colloidal Properties and Rheological Behavior of Precipitated Calcium Carbonate Suspensions Dispersed with Sodium Polyacrylate, Gerard R. Gagnon
Synthesis and Characterization of Hybrid Mesoporous Silicia Membranes, Scott R. Higgins
Infestation Detection in Wild Blueberries Using Near Infrared Spectra and Multivariate Data Analysis, Boyan N. Peshlov
Mechanical Testing of Coated Paper Systems, Robert A. Rioux
Characterization of Mechanically and Enzymatically Produced Cellulose Nanofibers from Wood Pulp, Nazia Siddiqui
Hemicellulose Extraction of Mixed Southern Hardwoods, Mehmet Sefik Tunc
Theses/Dissertations from 2007
Kinetics and Mechanism of Oxygen Delignification, Yun Ji
Microhotplate Sensor Array Fabrication, Daesha More
Fluting in Heatset Web Offset Printing Process, Rajendra Nagubadi
Modification of Semi-metal Oxide and Metal Oxide Powders by Atomic Layer Deposition of Thin Films, Mark Q. Snyder
The Study of Coating and Ink Penetration into Coating Structures Using a Confocal Laser Scanning Microscope, John Tefft
Theses/Dissertations from 2006
CO2 Pyrolysis and Gasification of Kraft Black Liquor Char, T. Sean Connolly
Production of Ethanol from Hardwood, Jay Mitchell
Theses/Dissertations from 2005
Kinetics of the Direct Causticizing Reaction between Black Liquor and Titanates During Low Temperature Gasification, Xiaowen Chen
Effect of Aluminum Sulfate and Sodium Alumniate on the Drainage and Retention Properties of Fibrous Suspensions, Wing T. Luu
Oxygen Delignification for Southern Softwood Kraft Pulps with High Lignin, Li Tao
Theses/Dissertations from 2004
Effect of Shear Rate and Mixing Time on Starch/Polyacrylamide Gels as Retention Aids, Benedict Cracolici
Pressure Distribution and Transfer in Rolling Nips, Suresh K. Devisetti
Gas-liquid Mass Transfer in Oxygen Delignification Systems, Deep Krothapalli
Polymer Templating in Surfactant Monolayers, Jason S. Poirier
The Leveling of Coating Layers, Jae Young Shin
Theses/Dissertations from 2003
Viscoelastic Roll Coating Flows, Mitchell A. Johnson
The Rate of Fluid Absorption in Porous Media, Ran Wei Rioux